Fixing K750i
So my K750i got busted up pretty good, but fear not, because at www.cnn.cn you can buy spares pretty darn cheap!
Anyways, here’s how I fixed my phone:
This is how it looked before..
Pretty busted, eh?
All the new parts.
You need a torx screwdriver, remove the 2 torx screws here.
When you’ve done that you can crack off the frontpanel. Be gentle!
Remove the keypad thingy, there´s a tiny connector which you need to unplug. There’s also 2 torx screws that hold down the LCD, remove these too. Unhook the LCD connector when you’re at it..
Don’t forget the little speaker grill sticker on your old backcover.. Just unscrew the two small screws when you remove the backcover, but remember, be gentle!
Disconnect the camera cord before taking out the main PCB. There are no screws, just wiggle it out gentle!
Now you have to remove the speaker, bluetooth antenna, normal antenna, camera, camera PCB, vibrator, memstick cover and all the buttons..
The camera is the hardest part, you have to peel of those small sticker-looking things on this side.
Just pull the camera cord through the little hole. The speaker is held down by some glue, just give it a good tuck to remove.
There, now you just have to put everything back in the new case.. Just backtrack..
Voila! Looking brand new!
Veeeery nice!